Centrifugal condensate pumps KS and pumps KSV find ready and highly specialized market. Condensate pumps represent unique horizontal electric units with a centrifugal section multistage pump, with unilateral arrangement of driving wheels and a screw which is specially arranged for dispensing loose products.
The condensate pump KS (pump KSV) consists of the soaking-up part and the driving engine installed on the main small frame (plate) and connected by means of the elastic coupling with rubber-bushed studs for pumps 1 KS 32, 1 KS 50 and 1 KS 80 and the elastic long-term star-type coupling for the pump 1 KS20.
The rotor in this design of KS pump is of great importance without it centrifugal condensate pumps won't work. It consists of driving wheels, a shaft, an unloading drum, a screw, plugs, details of consolidation and fasteners.
Condensate pumps KS and pumps KSV are intended for delivery of the exhaust steam condensate of stationary steam turbines as well as the heating steam from heat-exchange devices with the temperature up to 125 ⁰С, and for KS 32-150 and KS 80-155 pumps with the temperature up to 160 ⁰С. The condensate pumps are remarkable for good soaking-up abilities of the pump. Net pump suction head doesn't exceed 2,5 m on an inlet connection over the vapor pressure (regardless of the condensate temperature and the condenser discharging amount).
The identification mark of the condensate pump is КS12-50-UHL4, where
Types of delivered pumps:
1. Horizontal multistage pumps.
These are the two-stage and four-stage pumps with the horizontal casing joint of spiral type, a wheel of single inlet. Inlet and outlet pump tube assemblies are in the lower part of the case and are directed the way as follows: an inlet pump tube assembly is directed downwards; pressure pump tube assembly is horizontal.
2. Horizontal sectional pumps.
Include single case condensate pumps (three stage) КS 50-55-2, six stage pumps КS 50-110-2, КS 80-155-2.
3. Vertical sectional pumps.
These are barrel insert pumps КSV. The topping wheel of the screw type is installed before the first stage to ensure the high soaking ability of the pump. The external case is welded; the internal one consists of admission, sections with the pressed directing devices and a pressure head cover.
4. Single stage condensate pumps.
These are the pumps of spiral type with a bilateral input wheel. They include pumps with the delivery of 1000, 1500 and 1600 m3 per hour. Pumps with identification mark KCA are developed especially for nuclear power plants.
Теl.: +7 (495) 708-43-30 ext. 214
Только самые важные новости из вашей отрасли
По делу. Без спама.
о новой продукции
и актуальных новостях
«КАНЕКС ТЕХНОЛОГИЯ»!Проверьте почту — мы отправили вам письмо-подтверждение.